Are the fire dampers in your building’s ventilation system compliant and working correctly? They’re a critical part of stopping fire spread. Let us handle your reliable fire damper installation, inspections and maintenance across Sydney and NSW. Our licensed techs service any existing installation to Australian standards.
Have you ever wondered what a fire damper is exactly and why building managers stress about them? Think of it as a vital safety gate inside your air ducts. Its main job is maintaining fire compartmentation – basically stopping fire and deadly smoke from spreading where ducts pass through fire-rated barriers.
If mechanical or intumescent fire dampers fail and they do seize up from dust or lack of use, smoke can travel rapidly, putting occupants at serious risk far from the actual fire source. Smoke inhalation is a major killer in fires, making working dampers essential.
Routine checks per Australian Standards (like standard AS 1682) are vital but often missed, increasing the risk of non-compliance fines and compromising overall building safety.
That’s where All Passive Services steps in to provide expert inspection, maintenance (checking linkage, release mechanisms and seals) and installation. Our accredited passive fire technician team verifies that the systems operate correctly, meet BCA/NCC regulations and maintain required compartmentation.
Need a professional check-up for your building?
Years of Experience –
Operating Since 2014
Certificate (OC) delays with expert fire contractors managing passive system integrity (seals, structural coatings, lightweight construction) and required documentation proactively throughout the entire build phase.
coordination. We liaise directly with your trades (plumbers, electricians, HVAC), ensuring fire protection standards are not missed in the handover rush or create interface issues.
fire protection service in Sydney that provides clear photo documentation and compliance summaries, making your evidence straightforward for certifiers and reducing paperwork hassles.
Hand over a building with confidence in its passive fire integrity. Learn why builders choose our expertise. We ensure the correct installation of systems like vermiculite fire spray and compliant fire stopping, providing the baseline data needed for handover.
If you need expert damper inspection, maintenance or installation, we’re here to help. To give you the best advice efficiently, please tell us about your building type, the approximate number/location of dampers (if known), and any current compliance issues or inspection reports you have regarding fire dampers in Australia.
Our customers trust us to deliver effective fire safety. See why they rely on our fire dampers service.
“As a strata manager overseeing several high-rise buildings, I’ve worked with many contractors — and All Passive Services stands out for all the right reasons. Their reporting is thorough, their team communicates clearly, and they’re always proactive with compliance deadlines. ”
“We needed a fire stopping contractor who could meet tight timelines without compromising quality, and APS delivered. Their understanding of NCC requirements is exceptional, and their install team worked seamlessly with our site crew.”
“We had no idea where to start with all the passive fire stuff in our new commercial fit-out, but the guys at All Passive Services just took care of it. No jargon, no stress — just straight-up good service. Can’t thank them enough.”
Got questions about fire damper compliance? It’s a common area for defects found during annual inspections, often due to a lack of maintenance required by Australian Standards like AS 1851. We’ve got answers to help you understand these critical passive fire components.
The testing frequency for fire dampers is mandated by Australian Standards, specifically AS 1851. Routine service intervals depend on the system but generally involve operational tests every 12 months, with visual checks more frequently. Keeping accurate records via Baseline Data helps manage this schedule.
If a damper fails its operational test (e.g. doesn’t close properly) during Annual Fire Safety Inspections, it’s recorded as a defect on your report. It must be repaired or replaced by an accredited technician to restore compliance before your AFSS can be fully signed off. Contact us for prompt repairs.
Yes. Our accredited passive fire technician team can inspect, test, maintain and replace any type of fire damper (mechanical or intumescent), regardless of who originally installed it, ensuring it meets current standards.
Not necessarily. Fire dampers are typically required only where ductwork penetrates fire-rated walls, floors or ceilings that separate fire compartments. Their purpose is to maintain the integrity of that fire barrier according to the building’s approved design.
Mechanical dampers usually have a fusible link that melts at a certain temperature, causing blades to close. Intumescent dampers contain material that swells rapidly when exposed to heat, sealing the opening. Both types require regular checks as part of our services.
Generally, they’re required where HVAC ductwork or air transfer openings penetrate fire-rated walls, floors, ceilings, fire barriers, fire partitions, horizontal assemblies and shaft enclosures that separate fire compartments. The specific locations are detailed in the Building Code of Australia based on the building’s classification and fire compartmentation strategy.
Achieve peace of mind with correctly functioning, compliant dampers protecting your building’s ventilation system.
Expert installation, maintenance, and repairs to stop fire and smoke spreading through vents, keeping your system compliant.
Seal gaps in walls, floors, and ceilings with certified materials to prevent fire and smoke from spreading.
Thorough inspections to identify and fix fire hazards, ensuring your building stays safe and fully compliant year-round.
Protect beams & structures with fire-resistant vermiculite spray, helping them withstand extreme heat and meet compliance.
Detailed fire safety records and compliance assessments to track, document, and maintain your building’s fire protection.
We support builders with compliant fire protection solutions, integrating passive fire safety into projects and construction.
We provide full-service passive fire protection to commercial and residential properties across Sydney. From inspections and fire stopping to dampers and compliance, our local team ensures every building meets regulatory standards with precision and professionalism.
Serving the Newcastle region with reliable fire compliance solutions, we support strata, builders, and facility managers with proactive inspections, testing, repairs, and documentation. Our team is deeply familiar with local building codes and compliance requirements.
All Passive Services proudly offers passive fire protection services tailored to buildings in the Central Coast area. Our expert technicians deliver efficient, standards-compliant fire safety systems to protect people, property, and your peace of mind.
All Passive Services is a dedicated team of professionals committed to delivering compliant, cost-effective, and high-quality passive fire protection across Sydney, Newcastle, and beyond. We specialise in helping property managers, strata, facility maintenance teams, and builders meet essential safety standards through tailored services and long-term partnerships.
Explore our blog for expert guidance on passive fire protection, fire compliance, and property maintenance. We share industry updates, safety tips, and answers to common questions to help you stay informed and confident about your building’s fire safety needs.